Python vs PHP

| | | | | |

👻 Check our latest review to choose the best laptop for Machine Learning engineers and Deep learning tasks!

PHP: Hypertext preprocessor invented in 1995, also known as PHP, is a server-side scripting language. It is used to create dynamic HTML content over the Internet. It is widely used to create XML documents, Flash animations, graphics, PDFs, and more.

    Ease of use

  • Python is powerful, portable , open source and relatively easy to learn and fun to use. It has many features that are not supported by other programming languages. Its syntax is simpler and Python code is more readable compared to other programming languages ‚Äã‚Äãsuch as PHP, C, and C++.
  • PHP is not used for general-purpose programming, it is only used to create dynamic web content using HTML. The only reason to stick with PHP is — it’s ease of use.

Python versus PHP

Parameter Python PHP
Learning Python is better than PHP in long term project. PHP has low learning curve, it is easy to get started with PHP.
Framework Compare to PHP Python has lower number of Frameworks. Popular ones are DJango, Flask. PHP has huge number of framework. Popular ones are Laravel, Slim.
Syntax Syntax is easy to remember almost similar to human language. Syntax is little bit uncommon compare to Python, it has a wide range of naming convention.
Key Features Less line no of code, Rapid deployment and dynamic typing. Open Source and easy deployment.
Language type It is a general purpose programing language. It is a web development programing language.
Populer Field Machine Learning, Data Science, Artificial Intelligence and Automation task. Choice of language in web development.
Maintain Comnpare to PHP it’s more easy to maintain. Little bit dificult to maintain .
Populrity Pace After 2016 Python’s popularity is increasing rapidly. At the same time PHP loosing it’s popularity on stack overflow .

Community Support

  • Python has grown in the field of CGI scripting and over the years has become one of the most widely used programming languages ‚Äã‚Äãfor web development.
  • While PHP, on the other hand, is new to web scripting ... Although PHP was a powerful programming language when it was originally released, it would provide the same extensibility.

Output
Both PHP and Python. are without a doubt the most preferred programming languages ‚Äã‚Äãfor backend web development, but they have their own distinctive features. PHP is based on object-oriented programming whereas Python is both object-oriented and procedural-oriented programming. Python — it is a general-purpose programming language used for server-side web development. On the other hand, PHP is not intended for general purpose programming, it is only used for server-side web development. The only reason to stick with PHP is — it’s ease of use and reliability.

👻 Read also: what is the best laptop for engineering students?

Python vs PHP __del__: Questions

How can I make a time delay in Python?

5 answers

I would like to know how to put a time delay in a Python script.

2973

Answer #1

import time
time.sleep(5)   # Delays for 5 seconds. You can also use a float value.

Here is another example where something is run approximately once a minute:

import time
while True:
    print("This prints once a minute.")
    time.sleep(60) # Delay for 1 minute (60 seconds).

2973

Answer #2

You can use the sleep() function in the time module. It can take a float argument for sub-second resolution.

from time import sleep
sleep(0.1) # Time in seconds

Python vs PHP __del__: Questions

How to delete a file or folder in Python?

5 answers

How do I delete a file or folder in Python?

2639

Answer #1


Path objects from the Python 3.4+ pathlib module also expose these instance methods:

Is there a list of Pytz Timezones?

3 answers

I would like to know what are all the possible values for the timezone argument in the Python library pytz. How to do it?

834

Answer #1

You can list all the available timezones with pytz.all_timezones:

In [40]: import pytz
In [41]: pytz.all_timezones
Out[42]: 
["Africa/Abidjan",
 "Africa/Accra",
 "Africa/Addis_Ababa",
 ...]

There is also pytz.common_timezones:

In [45]: len(pytz.common_timezones)
Out[45]: 403

In [46]: len(pytz.all_timezones)
Out[46]: 563

Python strptime() and timezones?

3 answers

I have a CSV dumpfile from a Blackberry IPD backup, created using IPDDump. The date/time strings in here look something like this (where EST is an Australian time-zone):

Tue Jun 22 07:46:22 EST 2010

I need to be able to parse this date in Python. At first, I tried to use the strptime() function from datettime.

>>> datetime.datetime.strptime("Tue Jun 22 12:10:20 2010 EST", "%a %b %d %H:%M:%S %Y %Z")

However, for some reason, the datetime object that comes back doesn"t seem to have any tzinfo associated with it.

I did read on this page that apparently datetime.strptime silently discards tzinfo, however, I checked the documentation, and I can"t find anything to that effect documented here.

I have been able to get the date parsed using a third-party Python library, dateutil, however I"m still curious as to how I was using the in-built strptime() incorrectly? Is there any way to get strptime() to play nicely with timezones?

198

Answer #1

I recommend using python-dateutil. Its parser has been able to parse every date format I"ve thrown at it so far.

>>> from dateutil import parser
>>> parser.parse("Tue Jun 22 07:46:22 EST 2010")
datetime.datetime(2010, 6, 22, 7, 46, 22, tzinfo=tzlocal())
>>> parser.parse("Fri, 11 Nov 2011 03:18:09 -0400")
datetime.datetime(2011, 11, 11, 3, 18, 9, tzinfo=tzoffset(None, -14400))
>>> parser.parse("Sun")
datetime.datetime(2011, 12, 18, 0, 0)
>>> parser.parse("10-11-08")
datetime.datetime(2008, 10, 11, 0, 0)

and so on. No dealing with strptime() format nonsense... just throw a date at it and it Does The Right Thing.

Update: Oops. I missed in your original question that you mentioned that you used dateutil, sorry about that. But I hope this answer is still useful to other people who stumble across this question when they have date parsing questions and see the utility of that module.

Fitting empirical distribution to theoretical ones with Scipy (Python)?

3 answers

INTRODUCTION: I have a list of more than 30,000 integer values ranging from 0 to 47, inclusive, e.g.[0,0,0,0,..,1,1,1,1,...,2,2,2,2,...,47,47,47,...] sampled from some continuous distribution. The values in the list are not necessarily in order, but order doesn"t matter for this problem.

PROBLEM: Based on my distribution I would like to calculate p-value (the probability of seeing greater values) for any given value. For example, as you can see p-value for 0 would be approaching 1 and p-value for higher numbers would be tending to 0.

I don"t know if I am right, but to determine probabilities I think I need to fit my data to a theoretical distribution that is the most suitable to describe my data. I assume that some kind of goodness of fit test is needed to determine the best model.

Is there a way to implement such an analysis in Python (Scipy or Numpy)? Could you present any examples?

Thank you!

159

Answer #1

Distribution Fitting with Sum of Square Error (SSE)

This is an update and modification to Saullo"s answer, that uses the full list of the current scipy.stats distributions and returns the distribution with the least SSE between the distribution"s histogram and the data"s histogram.

Example Fitting

Using the El Niño dataset from statsmodels, the distributions are fit and error is determined. The distribution with the least error is returned.

All Distributions

All Fitted Distributions

Best Fit Distribution

Best Fit Distribution

Example Code

%matplotlib inline

import warnings
import numpy as np
import pandas as pd
import scipy.stats as st
import statsmodels.api as sm
from scipy.stats._continuous_distns import _distn_names
import matplotlib
import matplotlib.pyplot as plt

matplotlib.rcParams["figure.figsize"] = (16.0, 12.0)
matplotlib.style.use("ggplot")

# Create models from data
def best_fit_distribution(data, bins=200, ax=None):
    """Model data by finding best fit distribution to data"""
    # Get histogram of original data
    y, x = np.histogram(data, bins=bins, density=True)
    x = (x + np.roll(x, -1))[:-1] / 2.0

    # Best holders
    best_distributions = []

    # Estimate distribution parameters from data
    for ii, distribution in enumerate([d for d in _distn_names if not d in ["levy_stable", "studentized_range"]]):

        print("{:>3} / {:<3}: {}".format( ii+1, len(_distn_names), distribution ))

        distribution = getattr(st, distribution)

        # Try to fit the distribution
        try:
            # Ignore warnings from data that can"t be fit
            with warnings.catch_warnings():
                warnings.filterwarnings("ignore")
                
                # fit dist to data
                params = distribution.fit(data)

                # Separate parts of parameters
                arg = params[:-2]
                loc = params[-2]
                scale = params[-1]
                
                # Calculate fitted PDF and error with fit in distribution
                pdf = distribution.pdf(x, loc=loc, scale=scale, *arg)
                sse = np.sum(np.power(y - pdf, 2.0))
                
                # if axis pass in add to plot
                try:
                    if ax:
                        pd.Series(pdf, x).plot(ax=ax)
                    end
                except Exception:
                    pass

                # identify if this distribution is better
                best_distributions.append((distribution, params, sse))
        
        except Exception:
            pass

    
    return sorted(best_distributions, key=lambda x:x[2])

def make_pdf(dist, params, size=10000):
    """Generate distributions"s Probability Distribution Function """

    # Separate parts of parameters
    arg = params[:-2]
    loc = params[-2]
    scale = params[-1]

    # Get sane start and end points of distribution
    start = dist.ppf(0.01, *arg, loc=loc, scale=scale) if arg else dist.ppf(0.01, loc=loc, scale=scale)
    end = dist.ppf(0.99, *arg, loc=loc, scale=scale) if arg else dist.ppf(0.99, loc=loc, scale=scale)

    # Build PDF and turn into pandas Series
    x = np.linspace(start, end, size)
    y = dist.pdf(x, loc=loc, scale=scale, *arg)
    pdf = pd.Series(y, x)

    return pdf

# Load data from statsmodels datasets
data = pd.Series(sm.datasets.elnino.load_pandas().data.set_index("YEAR").values.ravel())

# Plot for comparison
plt.figure(figsize=(12,8))
ax = data.plot(kind="hist", bins=50, density=True, alpha=0.5, color=list(matplotlib.rcParams["axes.prop_cycle"])[1]["color"])

# Save plot limits
dataYLim = ax.get_ylim()

# Find best fit distribution
best_distibutions = best_fit_distribution(data, 200, ax)
best_dist = best_distibutions[0]

# Update plots
ax.set_ylim(dataYLim)
ax.set_title(u"El Niño sea temp.
 All Fitted Distributions")
ax.set_xlabel(u"Temp (°C)")
ax.set_ylabel("Frequency")

# Make PDF with best params 
pdf = make_pdf(best_dist[0], best_dist[1])

# Display
plt.figure(figsize=(12,8))
ax = pdf.plot(lw=2, label="PDF", legend=True)
data.plot(kind="hist", bins=50, density=True, alpha=0.5, label="Data", legend=True, ax=ax)

param_names = (best_dist[0].shapes + ", loc, scale").split(", ") if best_dist[0].shapes else ["loc", "scale"]
param_str = ", ".join(["{}={:0.2f}".format(k,v) for k,v in zip(param_names, best_dist[1])])
dist_str = "{}({})".format(best_dist[0].name, param_str)

ax.set_title(u"El Niño sea temp. with best fit distribution 
" + dist_str)
ax.set_xlabel(u"Temp. (°C)")
ax.set_ylabel("Frequency")

We hope this article has helped you to resolve the problem. Apart from Python vs PHP, check other __del__-related topics.

Want to excel in Python? See our review of the best Python online courses 2022. If you are interested in Data Science, check also how to learn programming in R.

By the way, this material is also available in other languages:



Anna Gonzalez

Tallinn | 2022-11-27

power is always a bit confusing 😭 Python vs PHP is not the only problem I encountered. Will use it in my bachelor thesis

Walter Porretti

Milan | 2022-11-27

I was preparing for my coding interview, thanks for clarifying this - Python vs PHP in Python is not the simplest one. Will get back tomorrow with feedback

Xu Gonzalez

Berlin | 2022-11-27

Thanks for explaining! I was stuck with Python vs PHP for some hours, finally got it done 🤗. I just hope that will not emerge anymore

Shop

Learn programming in R: courses

$

Best Python online courses for 2022

$

Best laptop for Fortnite

$

Best laptop for Excel

$

Best laptop for Solidworks

$

Best laptop for Roblox

$

Best computer for crypto mining

$

Best laptop for Sims 4

$

Latest questions

NUMPYNUMPY

Common xlabel/ylabel for matplotlib subplots

12 answers

NUMPYNUMPY

How to specify multiple return types using type-hints

12 answers

NUMPYNUMPY

Why do I get "Pickle - EOFError: Ran out of input" reading an empty file?

12 answers

NUMPYNUMPY

Flake8: Ignore specific warning for entire file

12 answers

NUMPYNUMPY

glob exclude pattern

12 answers

NUMPYNUMPY

How to avoid HTTP error 429 (Too Many Requests) python

12 answers

NUMPYNUMPY

Python CSV error: line contains NULL byte

12 answers

NUMPYNUMPY

csv.Error: iterator should return strings, not bytes

12 answers

News


Wiki

Python | How to copy data from one Excel sheet to another

Common xlabel/ylabel for matplotlib subplots

Check if one list is a subset of another in Python

sin

How to specify multiple return types using type-hints

exp

Printing words vertically in Python

exp

Python Extract words from a given string

Cyclic redundancy check in Python

Finding mean, median, mode in Python without libraries

cos

Python add suffix / add prefix to strings in a list

Why do I get "Pickle - EOFError: Ran out of input" reading an empty file?

Python - Move item to the end of the list

Python - Print list vertically