Using Pip to install packages to Anaconda Environment

| | |

👻 Check our latest review to choose the best laptop for Machine Learning engineers and Deep learning tasks!

conda 4.2.13 MacOSX 10.12.1

I am trying to install packages from pip to a fresh environment (virtual) created using anaconda. In the Anaconda docs it says this is perfectly fine. It is done the same way as for virtualenv.

Activate the environment where you want to put the program, then pip install a program...

I created an empty environment in Ananconda like this:

conda create -n shrink_venv

Activate it:

source activate shrink_venv

I then can see in the terminal that I am working in my env (shrink_venv). Problem is coming up, when I try to install a package using pip:

(shrink_venv): pip install Pillow

Requirement already satisfied (use --upgrade to upgrade): Pillow in /Library/Python/2.7/site-packages

So I can see it thinks the requirement is satisfied from the system-wide package. So it seems the environment is not working correctly, definitely not like it said in the docs. Am I doing something wrong here?

Just a note, I know you can use conda install for the packages, but I have had an issue with Pillow from anaconda, so I wanted to get it from pip, and since the docs say that is fine.

Output of which -a pip:

/usr/local/bin/pip
/Users/my_user/anaconda/bin/pip

** UPDATE ** I see this is pretty common issue. What I have found is that the conda env doesn"t play well with the PYTHONPATH. The system seems to always look in the PYTHONPATH locations even when you"re using a conda environment. Now, I always run unset PYTHONPATH when using a conda environment, and it works much better. I"m on a mac.

👻 Read also: what is the best laptop for engineering students?

Using Pip to install packages to Anaconda Environment cos: Questions

cos

How do I install pip on macOS or OS X?

5 answers

I spent most of the day yesterday searching for a clear answer for installing pip (package manager for Python). I can"t find a good solution.

How do I install it?

1672

Answer #1

UPDATE (Jan 2019):

easy_install has been deprecated. Please use get-pip.py instead.


Old answer:

easy_install pip

If you need admin privileges to run this, try:

sudo easy_install pip

1672

Answer #2

⚡️ TL;DR — One line solution.

All you have to do is:

sudo easy_install pip

2019: ⚠️easy_install has been deprecated. Check Method #2 below for preferred installation!

Details:

⚡️ OK, I read the solutions given above, but here"s an EASY solution to install pip.

MacOS comes with Python installed. But to make sure that you have Python installed open the terminal and run the following command.

python --version

If this command returns a version number that means Python exists. Which also means that you already have access to easy_install considering you are using macOS/OSX.

ℹ️ Now, all you have to do is run the following command.

sudo easy_install pip

After that, pip will be installed and you"ll be able to use it for installing other packages.

Let me know if you have any problems installing pip this way.

Cheers!

P.S. I ended up blogging a post about it. QuickTip: How Do I Install pip on macOS or OS X?


✅ UPDATE (Jan 2019): METHOD #2: Two line solution —

easy_install has been deprecated. Please use get-pip.py instead.

First of all download the get-pip file

curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py

Now run this file to install pip

python get-pip.py

That should do it.

Another gif you said? Here ya go!

1672

Answer #3

You can install it through Homebrew on OS X. Why would you install Python with Homebrew?

The version of Python that ships with OS X is great for learning but it’s not good for development. The version shipped with OS X may be out of date from the official current Python release, which is considered the stable production version. (source)

Homebrew is something of a package manager for OS X. Find more details on the Homebrew page. Once Homebrew is installed, run the following to install the latest Python, Pip & Setuptools:

brew install python

sin

How do I merge two dictionaries in a single expression (taking union of dictionaries)?

5 answers

Carl Meyer By Carl Meyer

I have two Python dictionaries, and I want to write a single expression that returns these two dictionaries, merged (i.e. taking the union). The update() method would be what I need, if it returned its result instead of modifying a dictionary in-place.

>>> x = {"a": 1, "b": 2}
>>> y = {"b": 10, "c": 11}
>>> z = x.update(y)
>>> print(z)
None
>>> x
{"a": 1, "b": 10, "c": 11}

How can I get that final merged dictionary in z, not x?

(To be extra-clear, the last-one-wins conflict-handling of dict.update() is what I"m looking for as well.)

5839

Answer #1

How can I merge two Python dictionaries in a single expression?

For dictionaries x and y, z becomes a shallowly-merged dictionary with values from y replacing those from x.

  • In Python 3.9.0 or greater (released 17 October 2020): PEP-584, discussed here, was implemented and provides the simplest method:

    z = x | y          # NOTE: 3.9+ ONLY
    
  • In Python 3.5 or greater:

    z = {**x, **y}
    
  • In Python 2, (or 3.4 or lower) write a function:

    def merge_two_dicts(x, y):
        z = x.copy()   # start with keys and values of x
        z.update(y)    # modifies z with keys and values of y
        return z
    

    and now:

    z = merge_two_dicts(x, y)
    

Explanation

Say you have two dictionaries and you want to merge them into a new dictionary without altering the original dictionaries:

x = {"a": 1, "b": 2}
y = {"b": 3, "c": 4}

The desired result is to get a new dictionary (z) with the values merged, and the second dictionary"s values overwriting those from the first.

>>> z
{"a": 1, "b": 3, "c": 4}

A new syntax for this, proposed in PEP 448 and available as of Python 3.5, is

z = {**x, **y}

And it is indeed a single expression.

Note that we can merge in with literal notation as well:

z = {**x, "foo": 1, "bar": 2, **y}

and now:

>>> z
{"a": 1, "b": 3, "foo": 1, "bar": 2, "c": 4}

It is now showing as implemented in the release schedule for 3.5, PEP 478, and it has now made its way into the What"s New in Python 3.5 document.

However, since many organizations are still on Python 2, you may wish to do this in a backward-compatible way. The classically Pythonic way, available in Python 2 and Python 3.0-3.4, is to do this as a two-step process:

z = x.copy()
z.update(y) # which returns None since it mutates z

In both approaches, y will come second and its values will replace x"s values, thus b will point to 3 in our final result.

Not yet on Python 3.5, but want a single expression

If you are not yet on Python 3.5 or need to write backward-compatible code, and you want this in a single expression, the most performant while the correct approach is to put it in a function:

def merge_two_dicts(x, y):
    """Given two dictionaries, merge them into a new dict as a shallow copy."""
    z = x.copy()
    z.update(y)
    return z

and then you have a single expression:

z = merge_two_dicts(x, y)

You can also make a function to merge an arbitrary number of dictionaries, from zero to a very large number:

def merge_dicts(*dict_args):
    """
    Given any number of dictionaries, shallow copy and merge into a new dict,
    precedence goes to key-value pairs in latter dictionaries.
    """
    result = {}
    for dictionary in dict_args:
        result.update(dictionary)
    return result

This function will work in Python 2 and 3 for all dictionaries. e.g. given dictionaries a to g:

z = merge_dicts(a, b, c, d, e, f, g) 

and key-value pairs in g will take precedence over dictionaries a to f, and so on.

Critiques of Other Answers

Don"t use what you see in the formerly accepted answer:

z = dict(x.items() + y.items())

In Python 2, you create two lists in memory for each dict, create a third list in memory with length equal to the length of the first two put together, and then discard all three lists to create the dict. In Python 3, this will fail because you"re adding two dict_items objects together, not two lists -

>>> c = dict(a.items() + b.items())
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: unsupported operand type(s) for +: "dict_items" and "dict_items"

and you would have to explicitly create them as lists, e.g. z = dict(list(x.items()) + list(y.items())). This is a waste of resources and computation power.

Similarly, taking the union of items() in Python 3 (viewitems() in Python 2.7) will also fail when values are unhashable objects (like lists, for example). Even if your values are hashable, since sets are semantically unordered, the behavior is undefined in regards to precedence. So don"t do this:

>>> c = dict(a.items() | b.items())

This example demonstrates what happens when values are unhashable:

>>> x = {"a": []}
>>> y = {"b": []}
>>> dict(x.items() | y.items())
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: unhashable type: "list"

Here"s an example where y should have precedence, but instead the value from x is retained due to the arbitrary order of sets:

>>> x = {"a": 2}
>>> y = {"a": 1}
>>> dict(x.items() | y.items())
{"a": 2}

Another hack you should not use:

z = dict(x, **y)

This uses the dict constructor and is very fast and memory-efficient (even slightly more so than our two-step process) but unless you know precisely what is happening here (that is, the second dict is being passed as keyword arguments to the dict constructor), it"s difficult to read, it"s not the intended usage, and so it is not Pythonic.

Here"s an example of the usage being remediated in django.

Dictionaries are intended to take hashable keys (e.g. frozensets or tuples), but this method fails in Python 3 when keys are not strings.

>>> c = dict(a, **b)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: keyword arguments must be strings

From the mailing list, Guido van Rossum, the creator of the language, wrote:

I am fine with declaring dict({}, **{1:3}) illegal, since after all it is abuse of the ** mechanism.

and

Apparently dict(x, **y) is going around as "cool hack" for "call x.update(y) and return x". Personally, I find it more despicable than cool.

It is my understanding (as well as the understanding of the creator of the language) that the intended usage for dict(**y) is for creating dictionaries for readability purposes, e.g.:

dict(a=1, b=10, c=11)

instead of

{"a": 1, "b": 10, "c": 11}

Response to comments

Despite what Guido says, dict(x, **y) is in line with the dict specification, which btw. works for both Python 2 and 3. The fact that this only works for string keys is a direct consequence of how keyword parameters work and not a short-coming of dict. Nor is using the ** operator in this place an abuse of the mechanism, in fact, ** was designed precisely to pass dictionaries as keywords.

Again, it doesn"t work for 3 when keys are not strings. The implicit calling contract is that namespaces take ordinary dictionaries, while users must only pass keyword arguments that are strings. All other callables enforced it. dict broke this consistency in Python 2:

>>> foo(**{("a", "b"): None})
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: foo() keywords must be strings
>>> dict(**{("a", "b"): None})
{("a", "b"): None}

This inconsistency was bad given other implementations of Python (PyPy, Jython, IronPython). Thus it was fixed in Python 3, as this usage could be a breaking change.

I submit to you that it is malicious incompetence to intentionally write code that only works in one version of a language or that only works given certain arbitrary constraints.

More comments:

dict(x.items() + y.items()) is still the most readable solution for Python 2. Readability counts.

My response: merge_two_dicts(x, y) actually seems much clearer to me, if we"re actually concerned about readability. And it is not forward compatible, as Python 2 is increasingly deprecated.

{**x, **y} does not seem to handle nested dictionaries. the contents of nested keys are simply overwritten, not merged [...] I ended up being burnt by these answers that do not merge recursively and I was surprised no one mentioned it. In my interpretation of the word "merging" these answers describe "updating one dict with another", and not merging.

Yes. I must refer you back to the question, which is asking for a shallow merge of two dictionaries, with the first"s values being overwritten by the second"s - in a single expression.

Assuming two dictionaries of dictionaries, one might recursively merge them in a single function, but you should be careful not to modify the dictionaries from either source, and the surest way to avoid that is to make a copy when assigning values. As keys must be hashable and are usually therefore immutable, it is pointless to copy them:

from copy import deepcopy

def dict_of_dicts_merge(x, y):
    z = {}
    overlapping_keys = x.keys() & y.keys()
    for key in overlapping_keys:
        z[key] = dict_of_dicts_merge(x[key], y[key])
    for key in x.keys() - overlapping_keys:
        z[key] = deepcopy(x[key])
    for key in y.keys() - overlapping_keys:
        z[key] = deepcopy(y[key])
    return z

Usage:

>>> x = {"a":{1:{}}, "b": {2:{}}}
>>> y = {"b":{10:{}}, "c": {11:{}}}
>>> dict_of_dicts_merge(x, y)
{"b": {2: {}, 10: {}}, "a": {1: {}}, "c": {11: {}}}

Coming up with contingencies for other value types is far beyond the scope of this question, so I will point you at my answer to the canonical question on a "Dictionaries of dictionaries merge".

Less Performant But Correct Ad-hocs

These approaches are less performant, but they will provide correct behavior. They will be much less performant than copy and update or the new unpacking because they iterate through each key-value pair at a higher level of abstraction, but they do respect the order of precedence (latter dictionaries have precedence)

You can also chain the dictionaries manually inside a dict comprehension:

{k: v for d in dicts for k, v in d.items()} # iteritems in Python 2.7

or in Python 2.6 (and perhaps as early as 2.4 when generator expressions were introduced):

dict((k, v) for d in dicts for k, v in d.items()) # iteritems in Python 2

itertools.chain will chain the iterators over the key-value pairs in the correct order:

from itertools import chain
z = dict(chain(x.items(), y.items())) # iteritems in Python 2

Performance Analysis

I"m only going to do the performance analysis of the usages known to behave correctly. (Self-contained so you can copy and paste yourself.)

from timeit import repeat
from itertools import chain

x = dict.fromkeys("abcdefg")
y = dict.fromkeys("efghijk")

def merge_two_dicts(x, y):
    z = x.copy()
    z.update(y)
    return z

min(repeat(lambda: {**x, **y}))
min(repeat(lambda: merge_two_dicts(x, y)))
min(repeat(lambda: {k: v for d in (x, y) for k, v in d.items()}))
min(repeat(lambda: dict(chain(x.items(), y.items()))))
min(repeat(lambda: dict(item for d in (x, y) for item in d.items())))

In Python 3.8.1, NixOS:

>>> min(repeat(lambda: {**x, **y}))
1.0804965235292912
>>> min(repeat(lambda: merge_two_dicts(x, y)))
1.636518670246005
>>> min(repeat(lambda: {k: v for d in (x, y) for k, v in d.items()}))
3.1779992282390594
>>> min(repeat(lambda: dict(chain(x.items(), y.items()))))
2.740647904574871
>>> min(repeat(lambda: dict(item for d in (x, y) for item in d.items())))
4.266070580109954
$ uname -a
Linux nixos 4.19.113 #1-NixOS SMP Wed Mar 25 07:06:15 UTC 2020 x86_64 GNU/Linux

Resources on Dictionaries

5839

Answer #2

In your case, what you can do is:

z = dict(list(x.items()) + list(y.items()))

This will, as you want it, put the final dict in z, and make the value for key b be properly overridden by the second (y) dict"s value:

>>> x = {"a":1, "b": 2}
>>> y = {"b":10, "c": 11}
>>> z = dict(list(x.items()) + list(y.items()))
>>> z
{"a": 1, "c": 11, "b": 10}

If you use Python 2, you can even remove the list() calls. To create z:

>>> z = dict(x.items() + y.items())
>>> z
{"a": 1, "c": 11, "b": 10}

If you use Python version 3.9.0a4 or greater, then you can directly use:

x = {"a":1, "b": 2}
y = {"b":10, "c": 11}
z = x | y
print(z)
{"a": 1, "c": 11, "b": 10}

5839

Answer #3

An alternative:

z = x.copy()
z.update(y)

We hope this article has helped you to resolve the problem. Apart from Using Pip to install packages to Anaconda Environment, check other cos-related topics.

Want to excel in Python? See our review of the best Python online courses 2022. If you are interested in Data Science, check also how to learn programming in R.

By the way, this material is also available in other languages:



Chen Emmerson

Vigrinia | 2022-11-30

Maybe there are another answers? What Using Pip to install packages to Anaconda Environment exactly means?. Will use it in my bachelor thesis

Dmitry Porretti

Rome | 2022-11-30

Thanks for explaining! I was stuck with Using Pip to install packages to Anaconda Environment for some hours, finally got it done 🤗. I am just not quite sure it is the best method

Manuel Robinson

Milan | 2022-11-30

I was preparing for my coding interview, thanks for clarifying this - Using Pip to install packages to Anaconda Environment in Python is not the simplest one. I am just not quite sure it is the best method

Shop

Learn programming in R: courses

$

Best Python online courses for 2022

$

Best laptop for Fortnite

$

Best laptop for Excel

$

Best laptop for Solidworks

$

Best laptop for Roblox

$

Best computer for crypto mining

$

Best laptop for Sims 4

$

Latest questions

NUMPYNUMPY

Common xlabel/ylabel for matplotlib subplots

12 answers

NUMPYNUMPY

How to specify multiple return types using type-hints

12 answers

NUMPYNUMPY

Why do I get "Pickle - EOFError: Ran out of input" reading an empty file?

12 answers

NUMPYNUMPY

Flake8: Ignore specific warning for entire file

12 answers

NUMPYNUMPY

glob exclude pattern

12 answers

NUMPYNUMPY

How to avoid HTTP error 429 (Too Many Requests) python

12 answers

NUMPYNUMPY

Python CSV error: line contains NULL byte

12 answers

NUMPYNUMPY

csv.Error: iterator should return strings, not bytes

12 answers

News


Wiki

Python | How to copy data from one Excel sheet to another

Common xlabel/ylabel for matplotlib subplots

Check if one list is a subset of another in Python

sin

How to specify multiple return types using type-hints

exp

Printing words vertically in Python

exp

Python Extract words from a given string

Cyclic redundancy check in Python

Finding mean, median, mode in Python without libraries

cos

Python add suffix / add prefix to strings in a list

Why do I get "Pickle - EOFError: Ran out of input" reading an empty file?

Python - Move item to the end of the list

Python - Print list vertically